SK-600073
Sky RC Lost Model Alarm
$10.99
Out of stock
This is a lost model alarm from Sky RC.
You may need these
Features
- Loud >85dB alarm gets your attention
- Built in LED
- Can be used as a reminder to turn off the receiver
- One minute TC inactive warning can be turned off (Mode 2)
- Plugs in to any standad 4.8 – 6.0 V DC powered receiver
- Average current draw is under 2.5mA when idle, 50mA during alarm
- Small size and weight (approx 7grams)
Reviews
Product Information
The lost model alarm is controlled by a tiny MCU. As simple device, it can be plugged into any servo/RX port, will detect the loss of TX signal and emit a loud 85dB alarm. Ideal for warning you if you have not turned off your RX power supply while in the pits, or if you are having trouble finding a model in the long grass, simply turn off your TX the alarm will sound and the red LED will start to blink! With its versatility and small size, the lost model alarm is a "must-have" accessory for fliers.
If you don't want the alarm to beep after one minute. You can disable one minute TX inactive warning by simply move the switch to mode 2.
Specs
- Dimension
- 12.9mm H x 18.1mm W x 18.1mm L
- Operating Voltage
- 5-6 volts DC
- Alert Level
- 85dB
- Protection
- IP20
- Storage Temperature
- -10-50℃
- Operating Temperature
- 0-40℃
- Current Consumption
- < 50 mA (Working mode) < 2.5 mA (Non-working mode)
- Weight
- 7g