Sebart Mini Avanti S 1.4m EDF Jet V2, Yellow and White
The Sebart Mini Avanti S ARF Jet was designed by the Italian aerobatic champion, Sebastiano Silvestri. This sport ARF jet model design is based on the BAE Hawk real aircraft design and enhanced by adding the ultimate aerodynamics principles of the modern FAI pattern models and using the 15 years of experience in flying jets of Seba.... the result is outstanding!
Features
- Painted fiberglass fuselage
- Wings and stabilizers in balsa covered with Oracover
- Suitable for P20-30 Jet turbine with the "Turbine Kit"
- Factory installed electric retract landing gear with doors sequencer included
Reviews
Product Information
The Sebart fibreglass Mini Avanti S Jet with electric retracts, gear doors and corresponding servos and sequencer, as well as all accessories. Designed for 90mm EDF or P20-30N jet turbine.
This innovative design combined with a lightweight structure, the full composite fibreglass fuselage and all-wood airframe wings and stabs, give the Mini Avanti S new levels of precision and smoothness at any airspeed and flight conditions.
What you need
- 90mm EDF and ESC
- Minimum 6 channels radio and receiver
- 7x sub micro servos (1x rudder, 2x elevator, 2x ailerons, 2x flaps), ie: Spektrum A4030
- 5000-5800 mAh 35-50c Lipo Battery (8 to 10s)
- Lipo Battery Charger
Specs
- Wingspan (mm):
- 1360mm / 53,54 in
- Length (mm):
- 1420mm / 55,9 in
- Weight (gr):
- 3800 gr (flying weight)
- Wing Surface Area:
- 38dm² / 589 sq in
- CG (Center of Gravity)
- Check manual
- Servos
- 7x sub micro servos
- EDF Diameter Class (mm):
- 90
- Battery Capacity (mAh)
- 5000-5.800 mAh
- Surfaces
- Ailerons, Rudder, Elevator, Flaps
- Landing Gear
- Retractable
- Material
- Fiberglass
- Build time
- 2 - 3 hours
- Required Radio
- 6 channels minimum
- Recommended pilot skill level
- Intermediate, Advanced