PI-RB-3100
Jeti Model 3100mah 2S 7.2v Li-Ion Receiver Battery
$103.99
Out of stock
Power-Ion accumulators are battery packs suitable to power the receiver and servos in the model. The main advantages of Power-Ion accumulators include high mechanical
You may need these
Features
Reviews
Product Information
Power-Ion accumulators are battery packs suitable to power the receiver and servos in the model. The main advantages of Power-Ion accumulators include high mechanical
resistance due to keeping in a metal case. The accumulators are also characterized by a long cycle life. No balancer is needed for their operation and in case the current is higher than 150A, short circuit protection is activated. Overcharge protection is activated if the charging voltage is higher than 5V per cell.
The accumulators are functional even at very low or very high temperatures (-10 - +60°C). Each pack is provided with one two-wire cable with the JR connector for
charging and with one two-wire cable with the MPX connector for connection to the model. Both cables are of the same length.
The accumulators are supplied in a plastic case and are fastened to it by Velcro. The case itself is screwed to a model using anti-vibration rubber grommets, see the picture below. Pay attention to the correct placing of the brass washer. Its wider part should be in contact with the assembly board to which the battery case is mounted to avoid extruding the material.
Specs
- Nominal Capactiy
- 3100mAh
- Nominal Voltage
- 7,2V
- Charging End Voltage
- 8,4V
- Lenght of the leads (1x MPX + 1x JR )
- 135mm each
- Weight
- 136g (incl. Box) / 104g (without Box)
- Dimensions
- 104x47x32mm (incl. Box) / 70x39x20mm (with out box)
- Duration Current max.
- 20A
- Peak Current max.
- 40A
- Charge max.
- 4A (at MPX Connector)