Flex Innovations Mamba 120cc RC Plane, ARF, Yellow, FPM1600

Out of stock

The Flex Innovations Mamba 120 is a lightweight 3D/aerobatic RC biplane that was designed by Quique Somenzini. Thanks to his knowledge and attention to detail, the Mamba 120 gives you a biplane experience that you can't get anywhere else.




  • Designed by Quique Somenzini
  • Laminated carbon fibre, fibreglass, plywood and balsa structure keeps the model lightweight, yet incredibly strong.
  • Horizontal stabilizers are easily removed and the elevator servos are mounted in the stabs no flying wires and no linkages to disconnect for transport
  • Airfoiled tail surfaces provide enhanced flight performance and strength
  • Interplane struts are quickly assembled or disassembled thanks to the retention pin design.
  • Carbon fibre landing gear included in the box
  • Two piece cowling for easier engine access
  • Pre-cut engine baffling for the DA-120 is included
  • Lightweight "soda bottle" style fuel tank included
  • Large main hatch with auxilliary forward hatch provide easy access to the fuel system and other components
  • Quick to assemble! Hinges and control horns (where possible) are installed by the factory.
  • Custom G10 Control Horns for Optimized Throw and Precision
  • Painted fibreglass wheel pants and cowling
  • Factory applied trim scheme
You're reviewing:

Flex Innovations Mamba 120cc RC Plane, ARF, Yellow, FPM1600

Your Rating


Product Information

Years of F3A and 3D biplane experience give Quique Somenzini the knowledge to design the Mamba to fly just right. Starting with a Model 12 that is officially licensed from Jim Kimball Enterprises, Quique made a variety of changes to improve and perfect the Mamba 120 as a 3D aerobatic model.

The Flex Innovations Mamba 120 excels in light wing loading and absolute minimum control coupling that are important in providing exceptional 3D performance.

What you need

  • 8+ channel transmitter
  • 8+ channel receiver, high-voltage capable
  • (8) Servos
    • (7) for control surfaces
    • (1) for throttle
  • Servo arms
    • (4) Aileron: 2-inch single
    • (2) Elevator: 2-inch single
    • (1) Rudder: 4-inch double sided
  • (9) Servo extensions
    • (3) 900 mm 
    • (2) 350 mm 
    • (2) 200 mm 
    • (2) 1250 mm
  • (2) 2S LiPo 2000mah 15C+ receiver battery
  • (1) 2S LiPo 2000mah 15C+ ignition battery
  • 100cc to 125cc gasoline engine with suitable exhaust
  • (4) Engine standoffs
  • 140mm spinner and suitable propeller


2160 mm
Length (with spinner)
2464 mm
Estimated Weight
13.15 kg
Gasoline (Petrol) 100-125cc

Product Manuals

All product manuals are provided by the manufacturer, If you don't find the manual or information you are looking for, contact our experts for help.