DSB45201

Dualsky 100A 12S OPTO Brushless ESC

$353.99
In stock
up
down

The Dualsky 100A 12S OPTO Brushless ESC is suited for 2m FAI, F3A and 3D models that weigh up to 10kg.

 

Features

  • Low voltage cut-off
  • Overheating protection
  • Signal loss auto cut-off
  • Normal, Soft or Super-Soft start-up modes available for both fixed wing and helicopter setups
  • Supports all motor types up to 210,000 rpm (2 Poles motors)
  • Adjustable cut-off - either stop motor or reduce the power
  • Dualsky Linear Brake Mode (DLBM) - Brake strength can be adjusted by the transmitter when switched on
  • Dualsky Governor Mode (DGM) ready
  • Extremely low resistance, factory high-quality mosFETs for high current usage
  • Smooth and accurate throttle control throughout the range
  • Throttle digital signal sampling, compatible with the signal frequency of 14 ms Normal mode and 7 ms high-speed mode (HS mode)
  • Suitable for all brands of transmitter as the throttle range can be re-calibrated
  • Fully PC programmable when used with the Dualsky USB link (not included)
  • Compatible with the Dualsky programming card (sold separately) for easy re-programming at the field
You're reviewing:

Dualsky 100A 12S OPTO Brushless ESC

Your Rating

Specs

Dimensions (L x W x D)
90 x 55 x 20mm
Weight
140g
Number of Cell
NiXX 15 - 36, 18 - 43.2V
LiPo 5 - 12, 18.5 - 44.4V
Resistance (Ri) (Ohm)
0.0023
Max Cont. Current
100A
Max Cont. Output
4200W
Max. Burst Current
130A
Max. Burst Output
5304W
BEC / Dissipative Power
N/A, OPTO
Programmable
Throttle + ProgCARD+ USB LINK
Input Wires
150mm, 12AWG, DC3
Output Wires
90mm, 12AWG, DB4
Signal Wire
300mm JR
Description
High Voltage
Applications
2m FAI F3A and 3D
Up to 10kg large models