AXI00001T1

Axial SCX24 1967 Chevrolet C10 1/24 Crawler RTR, Green, AXI00001T1

$229.99
ETA Dec 29
up
down

The ‘67 Chevy is an icon in the truck world, and it is now available in the Axial SCX24 micro scale range. The classic 1967 Chevrolet truck body is fully assembled and comes with a USB charger, LiPo battery and AA batteries for your transmitter so you are ready to run as soon as you take it out of the box. 

Looking for spare parts or upgrades?

View all spare parts
 

Features

  • Scale detailed 1967 Chevrolet C10 truck body
  • 2.4GHz, 2-channel Axial radio system
  • AS-1 Axial servo with servo saver
  • 7.4V 350mAh Dynamite 30C LiPo battery
  • 88T 180-size brushed electric Dynamite motor
  • Full time 4WD
  • Added ground clearance from worm drive gears on front and rear axles
  • Optimised handling from 3-link front and 4-link rear suspension
  • Increased strength from realistic steel frame rails
  • Easily accessible on-board components through hinged body system
  • Night driving enabled with two bright LEDs built into the front bumper
  • Licensed tyres and wheels from BF Goodrich Tyres and Method Wheels
  • Drivetrain equipped with full ball bearing setup
You're reviewing:

Axial SCX24 1967 Chevrolet C10 1/24 Crawler RTR, Green, AXI00001T1

Your Rating

Video

Product Information

1967 Chevrolet C10 replica from Axial

The latest Axial RC truck in the popular SCX24 series is the iconic 1967 Chevrolet C10. Ready to run and featuring great scale detail, this 1/24th scale RC truck has the versatility and size to access just about any RC crawling environment. Whether you’re at work, home or out and about any time’s a good time to get the SCX24 1967 Chevrolet C10 1/24 4WD RTR out for a crawl over any track you can fashion. If it’s been raining you needn’t worry. Axial's 1967 Chevrolet C10 replica has water-resistant electronics so when you’re out crawling in the wet the ‘67 Chevy will keep on going.

Axial 1967 Chevrolet C10 RC Crawler

Despite the 1/24th scale stature, the SCX24 1967 Chevrolet C10 1/24 4WD RTR delivers the crawling performance you expect from Axial through the durability and strength of the realistic steel front and rear axles, steel dogbones, and, steel chassis frame rails. Tough climbs and rough trails are no problems. Fitted out with and ready to run with servo, receiver, transmitter, ESC, LiPo and brushed motor the SCX24 1967 Chevrolet C10 1/24 4WD RTR just needs powering with the USB charger and you are ready to go places.

Massive fun with Axial's micro RC crawler

The combination of 3-link front and 4-link rear suspension with full-time 4WD allows this pocket rocket to power its way up and over the big challenges. Throw in coil-over shocks with simulated reservoirs and hard-wearing plastic suspension links and the SCX24 1967 Chevrolet C10 1/24 4WD RTR lives up to its Axial RC crawling pedigree. Increased ground clearance is provided by the worm gears on the axles and allow you to tackle bigger obstacles than you expected possible. For convenient access to on-board components and the battery compartment you just need to remove two clips to tilt back the body on the SCX24 1967 Chevrolet C10 1/24 4WD RTR making maintenance and changeovers super easy.

1967 Chevrolet C10 Model Car

Keeping you connected to the ground are the fully licensed wheels from BF Goodrich Tyres which are fitted to the fully licensed Method Wheels. Both based on their 1:1 counterparts. Whether you go crawling off-road or cruising on the flats the SCX24 1967 Chevrolet C10 1/24 4WD RTR by Axial is ready for the challenge.

What’s in the Box?

  • Axial® AX-4 2.4GHz Radio System

  • Axial® AS-1 Servo

  • Axial® AE-6 ESC/Receiver Combo

  • USB Charger (DYNC1062)

  • Dynamite® 88T 030 Brushed Electric Motor

  • Dynamite® 350mAh 2S LiPo 7.4V Battery Pack (DYNB0012)

  • 4 “AA” Batteries for the Transmitter

Specs

Completion Level
Ready-to-Run
Scale
1/24
Length
8.4 in (215mm)
Width
3.9 in (99.5mm)
Height
4.4 in (114.6mm)
Ground Clearance
1.06 in (27mm)
Wheelbase
5.2 in (133.2mm)
Track
3.9 in (99.5mm)
Front Track
3.9 in (99.5mm)
Rear Track
3.9 in (99.5mm)
Chassis
Stamped Steel Rails
Drivetrain
4WD
Differential
Worm Gear 16T/4T
Shock Type
Coil-over .9-1.3 in (24-33.4mm)
Wheel Type
Black Plastic
Wheel Diameter
1.0 in (26mm)
Wheel Width
.48 in (12.4mm)
Tyre Tread
Nitto Trail Grappler M/T
Tyre Diameter
1.88 in (48mm)
Motor Type
Brushed
Motor Size
180
Engine Size
88T
Pinion
10T
Spur Gear
55T
Speed Control Included
Y
Radio
Axial 2.4GHz, 2-Channel
Servos Included
Yes
Batteries
7.4V 350mAh 30C LiPo
Charger
USB LiPo
Body
Axial® Chevrolet C10 Pickup
Ball Bearings
Full
Experience Level
Beginner
Recommended Environment
All-Terrain
Is Assembly Required
No

Product Manuals

All product manuals are provided by the manufacturer, If you don't find the manual or information you are looking for, contact our experts for help.