Robbe EVOA 3.0 Electric Glider PNP

EVOA 3.0 - the new all-round star!

It has a very compact and transport-friendly size with its 3.0m wingspan and the two-part wing, which is attached to the side of the fuselage. The force is applied via a large CFRP spar connector.

The EVOA is manufactured in the latest full GRP sandwich construction and has many carbon fiber reinforcements at the neuralgic points. The wing is designed as a typical 4-flap wing with ailerons and flaps, which are classically hinged crosswise.

The transverse axis is stabilized and controlled by a laterally pluggable pendulum elevator using a deflection lever.

The flight characteristics can be described as more than just good-natured, especially due to its low weight. You can circle it slowly and comfortably in thermals, but you can also move it a little more sportily in dynamic aerobatics.The model is largely pre-assembled in the PNP version. The Ro-Power Torque X-36 motor, spinner, Aeronaut propeller and the servos including wiring are fully installed in the electro-PNP version, so that the construction effort is reduced to a minimum.

What's in the box?

• Model EVOA 3.0 in full GRP/CFRP construction, painted in multi-coloured form

• CFRP Viekantsteckung

• Ro-Power Torque X-36 Brushless, with 800KV motor built-in

• Z-Spinner 38mm built-in

• 12x8 Aeronaut CAM Carbon Propeller Mounted

• 2x FS-288 HV servos installed

• 4x FS-128 HV servos installed

• Incidentals

• Assembly instructions in German/English/French