LOS04010V2

Losi 8IGHT Nitro 1/8 4WD Buggy RTR, No Longer Available

$949.99
Out of stock

The 8IGHT racing platform is synonymous with competition and racers the world over. This Losi 8ight 1/8th Nitro Buggy comes in a ready-to-run package, giving anyone who is eager to get into the world of 1/8th nitro racing everything they need to be a competitor out-of-the-box.

Looking for spare parts or upgrades?

View all spare parts
 

Features

  • Starting package for 1/8th scale Nitro RC Racing
  • Optional parts included from 8IGHT™ series racing platform
  • Pull Start .21 Dynamite engine
  • Factory preset race geometry
  • Sealed Metal Gear Differentials
  • Spektrum SLT3 3-Channel Radio System
  • Distinct colour to stand out on the track
  • Includes Dynamite 1600mAh 6V NiMH receiver pack
  • Offering the newest 3.0 racing geometry in a low cost RTR configuration
  • All race team TLR hop-ups are transferrable
You're reviewing:

Losi 8IGHT Nitro 1/8 4WD Buggy RTR, No Longer Available

Your Rating

Video

Product Information

Losi 8IGHT Nitro Buggy - Ready to race!

Losi 8IGHT Nitro Buggy RTR

Just like a motorcross bike, the Losi Buggy will jump and maneuver through the air with precise control. Ride the berm, hit the down ramp... big air...no worries! Taking amazing features like the GEN III Radio Tray, the T6 4mm aluminium racing chassis, oil-filled shock and metal-gear differentials, dogbones, to name a few, the 8IGHT RTR Buggy offers amazing out of the box value. Hit the local track or club race with it and you will be immediately competitive. Plus the engineers at Losi have taken some of those initial set-up challenges away with factory pre-set shock geometry and differential settings.

Race-Proven Durability

In addition to its 4mm T-6 aluminium chassis plate, the 8IGHT Nitro buggy uses a Gen III radio tray. This radio tray was developed by the Team Losi Race drivers and prolongs steering and throttle servo life with features like ball-bearing linkages and more accurate linkage alignment. It has been designed to resist wear and tear from chassis flex, too.

Brute Power

RC nitro racing car

Pull-start is a must for any RTR nitro vehicle and a powerful Dynamite .21 nitro engine gives you all the grunt you need to be a front runner, right out of the box. That's right, you don't have to buy a starter box to get racing right away. Saving you some extra dollars to buy and burn more fuel at the track.

Metal-Gear Drivetrain and Sealed Differentials

A metal-gear transmission and sealed differentials give the buggy all the durability it needs for long mains and rough conditions. Tune to your track conditions as you become more experienced and watch those lap times improve.

Centre and Rear Dogbones

Dogbones are essential to eliminating unwanted friction and vastly improve the handling of the buggy, particularly to the rear.

Pre-Set Suspension Geometry

The suspension geometry is pre-set from the factory to match that used by professional team drivers so you can hit the track with confidence. And because it uses fixed-length turnbuckles and steering arms, you know it will remain consistent race to race.

What's in the box?

  • (1) 8IGHT 4WD Nitro Buggy RTR

  • (1) Spektrum SLT 3-Channel SLT Radio System

  • (1) Dynamite 1600mAh 6V NiMH receiver pack

  • (4) AA Transmitter Batteries

  • (1) 4-Way Cross Wrench

  • (1) Product Manual

What you need

  • 20-30% Nitromethane fuel
  • Nitromethane-Approved Dispenser
  • NiMH Charger
  • Glow Igniter

Specs

Water-Resistant
Yes
Charger
Sold Separately
Brakes
Composite disc with steel pads
Differential
Sealed, viscous filled
Drivetrain
4WD
Front Track
12.1" (307mm)
Shock Type
16mm Big-Bore, aluminum body, oil-filled
Suspension
Independent
Body
Screen printed, cab forward design
Gear Pitch
1.0 MOD
Receiver
Included
Servos
Included
Ground Clearance
2.4" (60mm)
Vehicle Type
Buggy
Wheelbase
12.7" (323 mm)
Fuel Tank Capacity
4.2oz (125cc)
Scale
1/8
Final Drive Ratio
11.5:1
Product Height
7.1" (180 mm)
Product Length
19.6" (498 mm)
Product Weight
7.8lbs (3.5kg)
Product Width
12.1" (307 mm)
Radio
Included
Battery
Included
Internal Gear Ratio
3.92:1
Chassis
4mm 6061 T-6 aluminum
Completion Level
Ready-To-Run
Pinion
17T
Rear Track
12.1" (307mm)
Spur Gear
50T
Approximate Assembly Time
No assembly required
Power Type
Glow

Product Manuals

All product manuals are provided by the manufacturer, If you don't find the manual or information you are looking for, contact our experts for help.