Losi 8IGHT Nitro 1/8 4WD Buggy RTR, No Longer Available
The 8IGHT racing platform is synonymous with competition and racers the world over. This Losi 8ight 1/8th Nitro Buggy comes in a ready-to-run package, giving anyone who is eager to get into the world of 1/8th nitro racing everything they need to be a competitor out-of-the-box.
Looking for spare parts or upgrades?
Features
- Starting package for 1/8th scale Nitro RC Racing
- Optional parts included from 8IGHT™ series racing platform
- Pull Start .21 Dynamite engine
- Factory preset race geometry
- Sealed Metal Gear Differentials
- Spektrum SLT3 3-Channel Radio System
- Distinct colour to stand out on the track
- Includes Dynamite 1600mAh 6V NiMH receiver pack
- Offering the newest 3.0 racing geometry in a low cost RTR configuration
- All race team TLR hop-ups are transferrable
Reviews
Video
Product Information
Losi 8IGHT Nitro Buggy - Ready to race!
Just like a motorcross bike, the Losi Buggy will jump and maneuver through the air with precise control. Ride the berm, hit the down ramp... big air...no worries! Taking amazing features like the GEN III Radio Tray, the T6 4mm aluminium racing chassis, oil-filled shock and metal-gear differentials, dogbones, to name a few, the 8IGHT RTR Buggy offers amazing out of the box value. Hit the local track or club race with it and you will be immediately competitive. Plus the engineers at Losi have taken some of those initial set-up challenges away with factory pre-set shock geometry and differential settings.
Race-Proven Durability
In addition to its 4mm T-6 aluminium chassis plate, the 8IGHT Nitro buggy uses a Gen III radio tray. This radio tray was developed by the Team Losi Race drivers and prolongs steering and throttle servo life with features like ball-bearing linkages and more accurate linkage alignment. It has been designed to resist wear and tear from chassis flex, too.
Brute Power
Pull-start is a must for any RTR nitro vehicle and a powerful Dynamite .21 nitro engine gives you all the grunt you need to be a front runner, right out of the box. That's right, you don't have to buy a starter box to get racing right away. Saving you some extra dollars to buy and burn more fuel at the track.
Metal-Gear Drivetrain and Sealed Differentials
A metal-gear transmission and sealed differentials give the buggy all the durability it needs for long mains and rough conditions. Tune to your track conditions as you become more experienced and watch those lap times improve.
Centre and Rear Dogbones
Dogbones are essential to eliminating unwanted friction and vastly improve the handling of the buggy, particularly to the rear.
Pre-Set Suspension Geometry
The suspension geometry is pre-set from the factory to match that used by professional team drivers so you can hit the track with confidence. And because it uses fixed-length turnbuckles and steering arms, you know it will remain consistent race to race.
What's in the box?
-
(1) 8IGHT 4WD Nitro Buggy RTR
-
(1) Spektrum SLT 3-Channel SLT Radio System
-
(1) Dynamite 1600mAh 6V NiMH receiver pack
-
(4) AA Transmitter Batteries
-
(1) 4-Way Cross Wrench
-
(1) Product Manual
What you need
- 20-30% Nitromethane fuel
- Nitromethane-Approved Dispenser
- NiMH Charger
- Glow Igniter
Specs
- Water-Resistant
- Yes
- Charger
- Sold Separately
- Brakes
- Composite disc with steel pads
- Differential
- Sealed, viscous filled
- Drivetrain
- 4WD
- Front Track
- 12.1" (307mm)
- Shock Type
- 16mm Big-Bore, aluminum body, oil-filled
- Suspension
- Independent
- Body
- Screen printed, cab forward design
- Gear Pitch
- 1.0 MOD
- Receiver
- Included
- Servos
- Included
- Ground Clearance
- 2.4" (60mm)
- Vehicle Type
- Buggy
- Wheelbase
- 12.7" (323 mm)
- Fuel Tank Capacity
- 4.2oz (125cc)
- Scale
- 1/8
- Final Drive Ratio
- 11.5:1
- Product Height
- 7.1" (180 mm)
- Product Length
- 19.6" (498 mm)
- Product Weight
- 7.8lbs (3.5kg)
- Product Width
- 12.1" (307 mm)
- Radio
- Included
- Battery
- Included
- Internal Gear Ratio
- 3.92:1
- Chassis
- 4mm 6061 T-6 aluminum
- Completion Level
- Ready-To-Run
- Pinion
- 17T
- Rear Track
- 12.1" (307mm)
- Spur Gear
- 50T
- Approximate Assembly Time
- No assembly required
- Power Type
- Glow
Product Manuals
All product manuals are provided by the manufacturer, If you don't find the manual or information you are looking for, contact our experts for help.