Aeronaut Lilienthal 40 1190mm Glider Kit

The shapely model is a further development of the popular Lilienthal 32 free-flight model, which has always achieved very good placements in the youth competitions.

With the Lilienthal 40 RC, removal with remote control is no longer a problem. The fuselage offers enough space for 2 micro servos, receiver and battery. A matching servo board, linkages and Bowden cable tubes are already included in the kit. However, the model can also be built as a pure free-flight model and the RC components can be retrofitted at a later date.

A high take-off hook is also included in the kit. As usual from aero-naut, all parts are precisely laser-cut. The nose strip of the model is already milled into shape – no sanding work is necessary here. The wing is glued together with preformed balsa parts with the help of support ribs. The ears of the wings are already made with the appropriate V-shape, which then no longer has to be elaborately sanded.

With a wingspan of 1,190mm, a take-off weight of 190-220g is achieved, depending on the expansion with or without RC components. The construction of the model is accompanied by the unique and youth-oriented 3D style building instructions known from aero-naut models, which ensure quick construction success. The model is approved and ideally suited for the youth competitions in the model aircraft associations.

To equip it as a remote-controlled model, you need two AN-8-HBA servos and the Lilienthal 40 drive set.