TOP Model Ventus 2CX De-luxe 4.5m Scale Glider with Retract

In stock

The TOP MODEL VENTUS 2cx is supplied in a highly pre-fabricated ARF version,  covered with Ultracote.

Looking for spare parts or upgrades?

View all spare parts


  • Fiberglass, white coloured fuselage with sliding cabin, fibreglass seat and dashboard panel, these parts are already installed
  • The wing: the centre of the wing is made of polystyrene, coated with obeche veneer, reinforced with glass fibre and a carbon flange. The construction is supplemented by beams that connect the top and bottom sheeting. The enclosure for mounting winglets, winglets, wing flaps and brake shields are also installed. The wing is with Ultracote.
  • White fully moulded fiberglass elevator
  • White fully moulded fiberglass rudder
  • White fully moulded fiberglass wing tip
  • Fiberglass frame of the cabin with glued clear cabin. The observation window and closing mechanism are also installed
  • Building instructions
  • Iron wing joiner
  • Small accessories
  • Completely assembled and covered model
  • The epoxy fibreglass fuselage has inbuilt connectors and cables for the aileron servos. The retractable landing gear and air brakes, retaining mechanism of the wing, cabin including scale modelling closing, instrument panel and seats are also built in the fuselage. The rudder is attached to the fuselage with a control horn and bowden cable
  • It contains the locking system of the wings against ejection. The tow hook, retractable landing gear and the tail wheel are also included
  • The wing has mounted ailerons, flaps, air brakes, including servo cables, connecting cables to the fuselage and a system of locking the wings.
  • high quality vinyl stickers are stuck on the model
You're reviewing:

TOP Model Ventus 2CX De-luxe 4.5m Scale Glider with Retract

Your Rating


Product Information

The TOP MODEL VENTUS 2CX is supplied in a highly pre-fabricated ARF 1/4 scale version,  covered with white Ultracote. It features a superbly moulded epoxy fibreglass fuselage, and foam core wings, covered with obeche veneer.

The model has ailerons (using 2 servos HS-5087MH), flaps (4 servos HS-5087MH), air brakes (2 servos HS-5087MH) elevator (1 servo HS-5087MH), rudder (1 servo HS-430BH), tow hook release (1servo D485HW), retract gear (1 servo D485HW). Servo mounts and connectors not included.


4500 mm
1610 mm
5.4 - 6 kg

Product Manuals

All product manuals are provided by the manufacturer, If you don't find the manual or information you are looking for, contact our experts for help.