SAB Avio KR84 Tortuga Jet

Out of stock


The SAB model is a semi-scale 1/8 model of the KR84 TORTUGA Robodrone version.


  • TORTUGA is a Full sandwich Fibreglass / Airex Fuselage (made under vacuum)
  • Super rigid, ready for High speed
  • All parts are already painted
  • Horns are already mounted
  • Super-fast assembly, in 2 hours the model is ready to fly
  • Launch hook if necessary
You're reviewing:

SAB Avio KR84 Tortuga Jet

Your Rating


Product Information

Ducks at the front of the fuselage provide sufficient rudder pressure even in slow flight. This super rigid model is ready for high speeds for more fun in the sky! 

Warning! This model is very fast and requires advanced experience. The position of its propeller (pusher style) located at the rear of the fuselage and its high rotational speed requires extreme caution when launching by hand. Touching the arm or hand with a rotating propeller can cause serious injury. When starting the engine as soon as you let go of the model (be careful of the torque effect during start-up) be cautious. If you are a Multiplex Funjet user already, the KR84 Tortuga launching methods will be familiar for you. Using a catapult system is another advised safe method. (a dedicated hook for this purpose is included with the kit)

What you need

  • Transmitter/Receiver (6-Channel Minimum Recommended)
  • Motor: Inrunner Motor (2200Kv Recommended)
  • Motor diameter: 28-36mm
  • Max. weight of motor: 150g
  • ESC: 100-120A
  • Propeller: 4.75x4.75 or 5x5 or 5.5x4.7 (pusher)
  • Minimum 4 channels radio and receiver
  • 2x mini wing servos (30x10x30)
  • 1x micro servo (12x23)
  • 2600-3200mAh 6S Lipo Battery (Recommended)
  • Lipo Battery Charger
  • Estimated build time is approximately 2 hours
  • We Recommend

  • Servo: Wing: Dualsky DS199 (2)
  • Servo: Canard: Dualsky DS5090 (1)
  • Battery:Dualsky DSBXP27006ULT (1)
  • ESC: Dualsky Summit 120 DSB21895 (1)
  • Motor: Kontronik Kira 480-26 (1) KON5423
  • Extension Leads: 450mm DSSE-450 (2) and 150mm DSSE-150 (1)
  • Glue and Build Tools


Type of kit
Wingspan (mm)
840mm / 33.07in
Length (mm)
810mm / 31.89in
Weight (gr)
1.5kg / 52.91oz
Wing Area
2400 cm2
CG (Center of Gravity)
Check manual
Battery Capacity (mAh)
Elevons, Canards
Landing Gear
None - belly lander (optional hook launch)
Build time
2 hours
4 channels minimum
Recommended pilot skill level
Advanced, Expert

Product Manuals

All product manuals are provided by the manufacturer, If you don't find the manual or information you are looking for, contact our experts for help.