- Model settings (servo travel, mixer) are made in the transmitter, no longer in the launcher / WINGSTABI
- No reprogramming of the models stored in the RC system necessary
- Fly after only 5-10 minutes with Wingstabi Easy Control with Wingstabi feeling!
- Universally applicable in connection with all common RC systems on the market, upgrade to original Wingstabi software or conversion of your WINGSTABI to WINGSTABI EASY control software possible via launcher on the PC. (with PC cable, not included)
This software runs on all WINGSTABI and, in contrast to the previous WINGSTABI, does not require a PC for setup. Consequently, WINGSTABI EASY Control can be integrated in every model programmed on your transmitter and, after a short
teach-in procedure (which servo does what), be flown.
In the factory default setting, the gyro function is switched off in the EASY Control software so that a model containing WINGSTABI EASY Control can be programmed on the respective transmitter - as would normally be the case without a gyro. Thanks to automatic RC system recognition, almost all RC equipment with a serial signal output at the receiver (Multiplex SRXL, HiTEC SL, Jeti EXBUS, Futaba S.BUS, Graupner HOTT, JR XBUS Mode B, PPM) is suitable. WINGSTABI with an integrated receiver is the best solution for M-LINK users.
If the smaller scope of system-related functions provided by EASY Control is insufficient, simply modify the software setting options on a computer (Windows PC/notebook) as desired using the MULTIPLEX Launcher via the USB interface. Alternatively, it is also possible to switch to the “CLASSIC” software version, which offers a much wider range of functions.
What's in the box?
1 x WINGSTABI EASY Control 7-Channel
1 x Manual
2 x Adhesive pads
1 x Receiver connection cable
1 x "Cheat sheet" learning card
1 x Wingstabi Easy Control learning plug
1 x Sheet of Wingstabi stickers
All product manuals are provided by the manufacturer, If you don't find the manual or information you are looking for, contact our experts for help.