E-Flite 30A Pro SB Brushless ESC (Coated) (V2)
This 30 Amp ESC is a high-quality sensorless brushless electronic speed control with an integrated switch-mode BEC that is very lightweight and efficient. It can operate without the need for a separate receiver battery to power your servos and receivers,saving you weight and complication.
Features
- Up to 30 amps continuous current with proper air flow and 35 amps burst current (15 seconds)
- 3.5A* continuous current, 5V Switch-Mode BEC Circuit
- Stronger BEC for support of most 3-axisstabilization systems
- Drive up to 7 analog or 6 digital standard-size servos with the BEC on Any recommended input voltage
- 3-to 6-cell Li-Po, 9-to 18-cell Ni-MH/Ni-Cd input voltage
- Programmable motor braking
- Safe power-arm mode prevents accidental starts
- Programmable low voltage cut off with settings for 3-cell Li-Po (9.2V), 6-cell Li-Po (12V) or 74% of battery starting voltage
- Programmable throttle input range: : 1.1–1.9ms or 1.2–1.8ms
- Programmable soft start for helis and airplanes
- Auto motor shut down if signal is lost or there is interference
- Programmable timing—5 user-selectable ranges to for use with a large variety of brushless motors
- Pre-wired connectors—E-flite EC3™ connector on battery input and 3.5mmgold bullet connectors on motor output leads
- * Proper cooling and airflow required
Reviews
Product Information
This 30 Amp ESC is a high-quality sensorless brushless electronic speed control with an integrated switch-mode BEC that is very lightweight and efficient. It can operate without the need for a separate receiver battery to power your servos and receivers,saving you weight and complication.
Your new E-Flite 30-Amp Pro Switch-Mode BEC Brushless ESC has a special water-resistant coating on the electronics to ensure reliable performance in higher than average moisture conditions. This conformal coating can offermild protection fromlight drops ofwater.
Specs
- Continuous Current
- 30A*
- Max Burst Current
- 35A (15 sec)*
- Length
- 51.0mm(2.0 in)
- Width
- 28.0mm(1.10 in)
- Height
- 8.70mm(0.35 in)
- Weight
- 31.0 g (1.10 oz
- Cells
- 3–6S Li-Po or 9–18 Ni-MH/Ni-Cd
- Battery Input Lead
- 16AWG with E-flite EC3 Connector
- Motor Output Leads
- 16AWG with 3.5mm Gold Bullet Connectors
Product Manuals
All product manuals are provided by the manufacturer, If you don't find the manual or information you are looking for, contact our experts for help.