DYNS2210

Dynamite WP 60A FWD/REV Brushed ESC

$61.99
In stock
up
down
 

Overview

This waterproof, brushed ESC is NiMH/LiPo compatible and offers forward/brake/reverse, forward/brake and crawler drive modes. Its compatibility makes it an ideal replacement ESC or the perfect upgrade to your current non-LiPo, non-waterproof, or limited motor spec ESC.

Features

  • Water resistant
  • Compatible with LiPo and NiMH batteries
  • Utilises jumper pins
  • Can accommodate motors up to 8T
  • Mounting tabs are removable, allowing for installation in a variety of vehicles
  • Crawler running mode available
  • Comes pre-wired with EC3 battery connector and RTR-compatible motor bullets
You're reviewing:

Dynamite WP 60A FWD/REV Brushed ESC

Your Rating

Product Information

This water-resistant brushed ESC from Dynamite is compatible with NiMH and LiPo batteries and offers forward, brake and reverse functionality. There is also a mode available for crawler driving.

Specs

Forward
Yes
Reverse
Yes
Brake
Yes
Time Delay Brake
Yes
Continuous Maximum Current
FWD: 60A REV: 30A
Input Voltage
2-3S Lipo, 5-9 cells NiMH/NiCd
Input Connector Types
EC3
Output Connector Types
3.5mm Tamiya style bullet
Motor Limit
2S Lipo/6cell NiMh >=8T 540/550 closed endbell motors, 3S Lipo/9cell NiMh >=13T 540/550 closed endbell motors
Momentary Peak Current
FWD: 360A REV: 180A
Length
1.48 in (37.5mm)
Width
1.46 in (37mm) without tabs, 2.23 in (56.6mm) with tabs
Height
0.71 in (18mm)
Weight
1.41 oz (40g)
BEC Voltage
5V
PWM Frequency
1KHz
Overload Protection
Yes
Full On Resistance
.0008 ohms
Wire Gauge
16AWG
Auto Cutoff
Yes

Product Manuals

All product manuals are provided by the manufacturer, If you don't find the manual or information you are looking for, contact our experts for help.