CSE060008400

Castle Creations 1515-2200kv 4 Pole Sensored Brushless Motor, 060-0084-00

$344.99
Out of stock

4-pole Sensored Brushless Motor, 1515-2200Kv 12WG

 

Features

  • Our IMPROVED 4-POLE 12-SLOT design boasts exceptional EFFICIENCY and produces LESS HEAT.
  • QUIETSENSE™ technology shields the sensors from magnetic field noise generated from the motor coils and keeps your motor and ESC in sync at all times. Use of a Flux Shield™ in conjunction with secondary Sense Magnets delivers even HIGHER PRECISION and MORE EFFICIENT startups.
  • Our OPTIMIZED design eliminates the need for mechanical timing adjustments. Our sensor alignment method delivers uniform timing and torque in both directions, automatically.
  • REBUILDABLE design allows users to replace front end bell/bearing assembly or rotor/shaft assembly.
  • ROAR standard sensor port and labeled connections.
  • Updated modern and sleek design; looks as cool as it performs.
You're reviewing:

Castle Creations 1515-2200kv 4 Pole Sensored Brushless Motor, 060-0084-00

Your Rating

Product Information

You might be familiar with the brute 1:8 scale version of the 1515-2200Kv (10AWG wire and 6.5mm bullets) that has overpowered buggies, truggies, on-road vehicles for years. Now we are offering our modified eBuggy version (paired with Mamba X 1:10 scale ESC, click here for details), tailored with pre-soldered 4mm bullet connections and 12AWG wire!

WHY SENSORED?

Drivers in all applications demand clean starts when coming off the line. Crawler fans require high-precision low speed control and torque for climbing, racers need precision and predictability, and dragsters don’t have a millisecond to spare. To achieve all of these performance demands and more, we have integrated rotor position sensor technology with our improved high power and high efficiency motor design. Through the use of our sensors, the position of the rotor is always known by the ESC. This eliminates the possibility of encountering cogging or inconsistency during startup. Users will experience PRECISE throttle control and BUTTERY SMOOTH starts plus the RAW POWER and LONGER RUN TIMES that our highly efficient motors produce.

WHAT MAKES AN EXCEPTIONAL MOTOR?

When tasked with designing a sensored motor our engineers started with the question,

“What makes a motor great?”

  • Efficiency

    • You can push it harder (gear it up)

    • You can run it longer (with the same battery)

    • It stays cool under extreme loads

  • Reliability

    • Ability to withstand the harsh demands of any RC application

    • Long-life, high-quality components

    • Proven manufacturing techniques

EFFICIENCY IS KEY

The higher the efficiency of a motor the more power it can produce without overheating, which allows you to safely run higher gear ratios. The higher the efficiency of a motor, the less power it takes to produce the same output power, which allows you to run longer on a single charge. The higher the efficiency of the motor, the less energy it turns into heat; keeping it cool under extreme loads. Efficiency equals performance.

RELIABILITY CAN’T BE IGNORED

Without a robust and reliable design, efficiency will only go so far. RC enthusiasts love pushing their equipment to the edge. The Castle engineers know this and spared no expense when developing a design that could hold up to the harsh conditions that the RC community will throw at it. Oversized NMB bearings and vibration dampening system ensure the longest bearing life possible. High-strength, high-temperature grade neodymium sintered magnets combined with a high-strength Kevlar wrap ensures the integrity of the rotor is not compromised during harsh running conditions. Our proprietary winding techniques allow us to produce a stator assembly that is the lowest possible resistance, resulting in a cooler running motor. A cooler motor has a longer lifetime. Construction of our motor required careful component selection; each verified through internal testing to ensure the highest efficiency possible. In the end, the result is a motor with unmatched quality, performance, and reliability. We wouldn’t put our name on anything less.

Specs

Input Voltage Range:
2S-6S LiPo (4s max when paired with Mamba X ESC)
Kv:
2200
Max. RPM:
60000
Size:
Length: 75.4mm
Diameter: 40mm (41.4mm with fins)
Shaft Size:
Length: 20mm
Diameter: 5mm
Mounting Hole Specifications:
M3 and M4 @ 25mm
Cooling Fan:
Optional, coming soon!
Connectors:
4mm male Castle Bullet Connectors, includes 210mm length sensor wire.
Items Needed for Operation:
Compatible Electronic Speed Control (ESC)
Application Guidelines:
Ideal for 1:8 scale Off-Road buggies weighing up to 9 lbs.
Recommended ESC(s):
Mamba X