Venom Temperature Monitor Setup

++ INSTALLATION

Slide the probe loop over the engine head and position it as close to the bottom of the head as possible. For best results, ensure the probe sensor, which is under the heat shrink, is at a 90-degree angle to the exhaust port.

Securely install the unit in an easily accessible spot. Use Servo Tape or Velcro to affix the unit in a convenient location.

++ SET UP & OPERATION

The POWER button controls power to the unit and resets the MIN/MAX function. To extend battery life, ensure the unit is turned off when not in use.

Use the C/F button to switch between Centigrade and Fahrenheit temperature readings.

Use the MIN/MAX button to recall the highest temperature reached during a run. Simply press and release the button to view the reading. If the MIN reading is displayed, press the button again for the MAX value. The values reset when the unit is turned off.

	[VEN0605] Venom Temperature Monitor and Failsafe for serious RC car racing enthusiast! View Venom Temperature Monitor Setup

• Accessories
• Almost-Ready-to-Fly
• Boats / Yachts
• Cars / Bikes
• Control Line
• Electric Flight
• Electric Accessories
• EPP / Foam
• Gliders & Sailplanes
• Helicopters
• Manuals
• Power Planes
• Power Motor/Acc
• RC Equipment
• Spare Parts Store
• DVDs / Videos

Useful Stuff

• Conversion Tool
• Games