Telink Tempest EPP Slope Combat

The TEMPEST follows in the wake of its very successful predecessors - the Tornado 11 and Tornado XX. It grew in size markedly, retaining the excellent flight characteristics of its forerunners. Thanks to the large size the in-flight behavior of the Tempest is of a more "grown-up" nature.

The building process does not differ substantially from that of the flying wings for combat flying.

Addition of tubular glassfibre spars brought more rigidity to the model.

To facilitate transport the wing is in two parts; the control is provided by an ordinary RC equipment.

Need to Complete

• Transmitter - two-channel one with the delta mixer (you can also use a mixer in the model)
• Servos - 2*, standard size (50 g)
• Receiver - standard
• Accumulator battery - 4 pieces*, AA size, in a flat pack

A list of other necessary material: epoxy glue, medium thick cyanoacrylate glue (we recommend the proven Flash brand), contact glue in a spray can (3M77), glass roving-reinforced self-adhesive tape, coloured self adhesive tape or iron-on covering film (AS Film) to cover the model, transparent self-adhesive tape to make the elevon hinges.

List of necessary tools: modelling knife, solder gun with spare wire for forming the cutting eyes, flat iron (a household one suffices), nippers, steel ruler, scissors...

List of parts in the kit:

• 2 wing halves of EPP (each in two sections)
• EPP strips to fill the wing main spar grooves
• 1*string to stiffen the wing and the joiner tube
• 2*elevon of extruded polystyrene foam
• 2*vertical stabilizer
• 2*glassfibre tube wing spar
• 4* joiner tubes
• 2* root rib
• 2*auxiliary rib
• 2*wing joiner
• 2*arm
• 4*screw
• 4*clevis
• 2*control rod
• 4*underlay material under the elevon arms
• 1*receiver cover

	[TELTEMPEST] Telink Tempest - This EPP combat model is designed for easy transport with 2 piece wings. It follows on from the successful Tornado II & Tornado XX.

You may also need the following to complete the model:

	Sanwa Dash II Digital Proportional Remote Control.  2 Servos & dry batteries. Reliable and functional for use in model aircraft and in cars. Features servo reversing and a special boat/car differential throttle setting.

You will need 8 x AA Alkaline batteries  or rechargeable batteries for the transmitter

	Note: Comes in a 4 pack		Sanyo AA alkaline batteries - 4 in a pack

OR

	[SPM66001E] Spektrum DX6i - Full range DSM2 transmitter with airplane and helicopter functionality. The DX6i comes with 10 model memory and a large LCD for easy programming. Note that this system is ideal for upgrading your 36MHz system and comes with the DX6i Tx and the AR6200 DSM2 Rx only - NO SERVOS. Download Spektrum DX6i Manual Mode 1 Mode 2

	Spektrum DS821 Digital Servo with carbonite gears.   Torque: 72 oz/in @ 4.8v, 88 oz/in @ 6.0v Speed: .19 sec/60deg @ 4.8v, .15 sec/60 deg @ 6.0v Size: 1.50"x.94"x1.47" Weight: 1.5 oz / 42g Ball-Bearing: Single Motor: Cored

	[EFLA101] Electronic Delta Mixer

	Coloured covering tape for your EPP foamie. Red AU$6.40   US$4.95 Yellow AU$6.40   US$4.95 Green AU$6.40   US$4.95 Blue AU$6.40   US$4.95

OR

	Solar Film (26x50”) heat shrink covering. Red AU$15.95   US$11.95 Cub Yellow AU$15.95   US$11.95 Blue AU$15.95   US$11.95 Orange AU$15.95   US$11.95 Silver AU$15.95   US$11.95 Black AU$15.95   US$11.95 Trans Yellow AU$15.95   US$11.95 Trans Orange AU$15.95   US$11.95 Fluro Yellow AU$15.95   US$11.95 Fluro Pink AU$15.95   US$11.95

	[EFLA206] Foam Compatible CA, 1oz Thick. * Compatible with most Styrofoam and foams * Odorless, non-allergenic, thick, slow-cure Cyanoacrylate * Excellent for wood and most other hobby materials 1 oz