Model Flight Park Stepp

The Little Party is the smaller version of the Party. Light enough for indoor flying but can be flown in the backyard. The Little Party has landing gear, so take offs and touch and goes are possible (and fun!), but it flies slow enough for backyard flying on the grass. The Little Party comes almost ready to fly.

The wings and tails are covered with Light Span fabric and decorated. The fuselage consists of a wooden tail boom, which holds the tails in back, the wing mounts and the motor system in front. The fuselage is under-slung from the boom similar to a parasol type aircraft. The wheels are attached to the fuselage making the Little Party a tail-dragger. Very nice work and a well thought out design making for a very stable and forgiving flier. This airplane is almost ready to fly with some assembly, radio and motor system installation left for the customer.

This is an airplane made in the Czech Republic so the quality is top notch, but does not come with a hardware package. Performance with the supplied motor and reduction drive is good and makes the Little Party light enough for indoor flying. Climb is good and the Little Party is capable of ROG-ing from smooth ground or pavement. The speed and duration of the fights is dictated by the battery pack used. We suggest the 110 mah battery pack for indoor and the larger packs for outdoor use. The 110 mah will give 5-7 minutes of flight time indoors; the 225 mah will give 14-18 minutes. We recommend the JR NES-371's or JR E151's for the sub-micro servos. The JR R610 FM micro receiver is an ideal choice for the receiver.

• Wingspan: 31.5"
• Wing area: 238 sq. in.
• Weight: 6-7 oz.
• Wing loading: 3.65-4.25 oz./sq. ft.
• Airfoil: Under cambered
• Motor: supplied with reduction drive and prop.
• Radio required: micro receiver, 2 sub micro servos, micro speed control, 7.2V 110mAh nicad