Tamiya AUDI TT-R Item #57721

Tamiya is proud to present the 1/10 Scale R/C ABT Audi TT-T DTM with the new TT-01 chassis in its Expert Built Series. This chassis features a highly reliable motor coupled with shaft driven 4WD transmission and high efficiency 4-wheel independent wishbone suspension.

• Chassis Type: TT-01

• Scale: 1/10

• Length: 17.36 inches (441mm)

• Width: 7.28 inches (185mm)

• Wheelbase: 10.12 inches (257mm)

• Front Tread: 6.18 inches (157mm)

• Rear Tread: 6.18 inches (157mm)

• Weight: 3.46 lbs. (1570g)

• Chassis: ABS Tub

• Suspension: 4 Wheel Independent

• Damper Type: Plastic coil over friction

• Drive Train: Shaft drive

• Gear Ratio: 8.35:1

• Differential Type: Bevel Gear

• Engine: Electric 540

• Speed Controller: Electronic Speed Controller (CPR Unit)

• Wheels & Tires: 10 Spoke/Radial

• Body Type: Polycarbonate Cut & Printed

• Caster Angle-F/R: 2deg/0deg

• Camber Angle-F/R: 1deg/1deg

• Toe Angle-F/R: 0deg/0deg

• Differential Gear System: F/R 3-Bevel Diff

• Tire Width: F/R both 27mm

• Tire Diameter: F/R both 65mm

• Tread Pattern: F/R Radial Type

• Radio: 2-Channel Pistol (included)

• Power Source: 7.2V battery (not included)

Smooth speed control and precise steering!
Just open the box, put the batteries in and grab the transmitter-now you're ready for the R/C experience of your life! Thanks to a speed controller allowing smooth acceleration and a digital proportional transmitter, this series is perfectly adapted for beginners and even advanced drivers who want to experiment with the thrill of high performances R/C cars without the assembly. Moreover, a full range of optional parts will allow you to customize your own setting.

The XB Pro Series cars are based on the high performance shaft-driven TT-01 chassis, which features a 4-wheel independent double wishbone suspension for precise control.

TT-01 chassis features a 4-wheel independent double wishbone suspension replicating that of an actual car for effective cornering.

A CPR-01 speed controller unit has been paired with a high performance Type 540 motor for smooth and effective acceleration. 

*Compatible motors: RS-540 Motor and RS-540 Sport Tuned Motor (with wiring for XB Series cars)
 

The TT-01 chassis is equipped with shaft-driven 4WD transmission to reduce power loss.

The linear response of front wheel steering will provide you with effective cornering even during sharp turns.

A digital proportional transmitter allowing smooth acceleration and precise steering is included in the set. All you need is separately sold 7.2V NiCd battery with a compatible charger and R6/AA/UM3 batteries.

Tamiya Hop-Up Options for TT01 series Chassis

	Tamiya is proud to present the 1/10 Scale R/C ABT Audi TT-T DTM with the new TT-01 chassis in its Expert Built Series.