Hitec HS-65 Micro Servo

Hitec HS-65 Specifications

• Control System: +Pulse Width Control 1500usec Neutral
• Required Pulse: 3-5 Volt Peak to Peak Square Wave
• Operating Voltage: 4.8-6.0 Volts
• Operating Temperature Range: -20 to +60 Degree C
• Operating Speed (4.8V): 0.14sec/60° at no load
• Operating Speed (6.0V): 0.11sec/60° at no load
• Stall Torque (4.8V): 25 oz/in. (1.8kg.cm)
• Stall Torque (6.0V): 31 oz/in. (2.2kg.cm)
• Operating Angle: 45 Deg. one side pulse traveling 400usec
• 360 Modifiable: No
• Direction: Clockwise/Pulse Traveling 1500 to 1900usec
• Current Drain (4.8V): 5.3mA/idle and 400mA no load operating
• Current Drain (6.0V): 6.6mA/idle and 500mA no load operating
• Dead Band Width: 4usec
• Motor Type: 3-Pole Neodynium Magnet
• Potentiometer Drive: Indirect Drive
• Bearing Type: Top Ball Bearing
• Gear Type: Karbonite Gears
• Connector Wire Length: 6" (150mm)
• Dimensions: 0.92" x 0.45"x 0.94" (23.6 x 11.6 x 24mm)
• Weight: .39oz. (11.2g)

	Download Hitec Servo Manual     Hitec’s HS-65 Micro Analog Servo. Also availabe with metal gears (HS-65MG) HS-65HB HS-65MG