Hitec HS-5745MG Servo

The HS-5745MG giant scale servo uses Hitec’s digital, programmable servo technology to provide tons of torque and holding power for the most demanding applications. Featuring three ball bearings, a custom external motor heat sink, and a solid metal gear train, the HS-5745MG is the servo of choice for your next large scale R/C project.

Hitec HS-5745MG Specifications

• Amplifier Type: Digital Amplifier & Mosfet Driver
• Operating Voltage: 4.8-6.0 Volts
• Operating Speed (4.8V): 0.18sec/60° at no load
• Operating Speed (6.0V): 0.15sec/60° at no load
• Stall Torque (4.8V): 208 oz/in. (15kg.cm)
• Stall Torque (6.0V): 250 oz/in. (18kg.cm)
• Direction: Clockwise/Pulse Traveling 1500 to 1900usec
• Current Drain (4.8V): 3mA/idle and 700mA no load operating
• Current Drain (6.0V): 3mA/idle and 840mA no load operating
• Stall Current (4.8V): 4000mA
• Stall Current (6.0V): 4800mA
• Dead Band Width: 2usec
• Motor Type: Cored Carbon Brush
• Bearing Type: Dual Ball Bearing
• Gear Type: 1 Resin, 3 Metal Gears
• Connector Wire Length: 11.8" (300mm)
• Connector Wire Gauge: 22AWG
• Connector Wire Strand Count: 60EA
• Dimensions: 2.30" x 1.10"x 2.000" (59 x 29 x 52 mm)
• Weight: 5.68oz (161g)

	Hitec HS-5745MG - Giant scale servo with metal gears and digital programmable technology Download Hitec Servo Manual