 1/4 Scale J-3 Cub ARFLarge scale air enthusiast will marvel at the Hangar 9 giant scale, super detailed J-3 Cub. The Cub is perfect for a 1st time large scale flight experience because of its smooth flight characteristics.
Hangar 9 has thought of just about everything to make this 1/4 scale Cub an incredibly accurate replica of the ever-popular Piper J-3 Cub. Right down to the scale dash with Piper Cub emblem in the tachometer, this is the large scale beauty designed with the scale admirer in mind. Scale enthusiasts will appreciate the more realistic Cub outline facilitated by simulated scale tubular construction of the top fuselage contour. Likewise, the scale fin to fuselage fillet molding echoes its full-scale counterpart. The scale Cub wheels and working landing gear facilitate easier landings, touch and go excitement and one-wheel arrivals. 
Scale fanatics will be astonished by the full-bodied pilot figure that is not only of accurate scale but is also posable. The operating door panels offer easy access to the interior of the plane and interior seating locks to the cockpit floor yet is also removable; both also contribute to the scale realism of the full scale Cub.
Besides the unparalleled scale detail, you also get smart design features like collapsible wing struts that are connected to the wing with a pivoting pin and keeper while a pin and cotter key system allows the struts to be removed from the fuselage without hassle. The 2-piece stab can also be removed if necessary.
The J-3 Cub can also be transformed by luxury of gas-and-go by adding a Zenoah G20ei engine (ZENE20EI).
1/4 Scale J-3 Cub Key Features- Full-bodied, posable pilot figure
- Scale dash including Cub in tachometer
- Scale Cub wheels and functioning landing gear
- Operating door panels and removable interior seating for easy access to the plane's interior
- Collapsible wing struts connected to wing and fuselage with an intelligent pin and cotter key system
- Tubular construction for top outline more true to Cub scale lines
- Scale fin to fuselage fillet
- Covered in genuine Hangar 9 UltraCote®
1/4 Scale J-3 Cub Specifications- Wing Span: 106 in (269 cm)
- Overall Length: 68 in (172.7 cm)
- Wing Area: 1630 sq in (150.2 sq dm)
- Flying Weight: 14.5–16.5 lb (6.6–7.5 kg)
- Engine Size: 1.00–1.60 2-stroke; 1.20–1.80 4-stroke; 20–26cc gas
- Motor Size: E-flite Power 110 Brushless Outrunner
- Radio: 4 to 6 channels
- Servos: 6 JR Hi-Torque (JRPS821) digital servos
- Trim Scheme Colors: Cub Yellow (HANU884) & Black (HANU874)
- CG (center of gravity): 4 ¾ to 5 inches from the leading edge of the wing at fuselage
- Wing Loading: 21.73 oz/sq ft
- Prop Size: 15x8–16x6 for gas; 14x6–16x4 for 2-stroke; 16x6–18x6 for 4-stroke; 19x8E for electric
- Spinner Size: 8mm x 1.25
- Recommended Battery: 2 x 4S 5000mAh Li-Po
- Scale: 25%
Needed to Complete- Recommended Setup – Gas
- Zenoah G20ei 20cc Electronic Ignition Engine (ZENE20EI)
- 4 or more channel radio system
- 6 JR Digital Hi-Torque DS589
- 7-Channel ScanSelect PCM Receiver (JRPR790)
- JR 6V 2400mAh Ni-Cd
- 15x8–16X6 Propeller
- 8mm x 1.25 Dubro Spinner Prop Nut (DUB735)
Recommended Setup – Glow
|
Imagine
this taking off from your local flying field?
Why not click on the price to order it NOW? |
|
Model Flight Recommends the
Following: |
More 1/4 Scale J-3 Cub Photos
|
I
want a quote on how much freight it will cost to send items to me.
Download Piper J3 Cub 1/4 Scale Manual
![[HAN4550] Hangar 9's giant 1/4 Scale Piper J-3 Cub ARF is an incredibly accurate replica designed with the scale admirer in mind.](hangar-9-pic/piper_j3_cub_i1.jpg)
