
The E-Flite Power 60 Outrunner Brushless Motor is ideal for 60-size sport and scale airplanes 6- to 10-pounds (2.7-4.5 Kg), 46-size 3D airplanes up to 7-pounds (3.2 Kg), or models requiring up to 1200 watts of power EFLM4060A Features- Equivalent to a 60-size glow engine for 6- to 10-pound (2.7 - 4.5Kg) airplanes
- Ideal for 46-size 3D airplanes up to 7-pounds (3.2 Kg)
- Ideal for models requiring up to 1200 watts of power
- High torque, direct drive alternative to inrunner brushless motors
- Includes mount, prop adapters, and mounting hardware
- Quiet, lightweight operation
- External rotor design, 6mm shaft can easily be reversed for alternative motor installations
- High quality construction with ball bearings and hardened steel shaft
- Slotted 12-pole outrunner design
EFLM4060A Specifications- Type: Brushless Outrunner
- Size: Replacement for 60-size glow engines
- Bearings or Bushings: Ball Bearings
- Wire Gauge: 14
- Recommended Prop Range: 14x8 to 16x10
- Voltage: 18.5 to 28.8
- RPM/Volt (Kv): 400
- Resistance (Ri): .06 ohms
- Idle Current (Io): 2.7A
- Shaft Diameter: 6mm (.24 in)
- Weight: 380 g (13 oz)
- Diameter: 50mm (2 in)
- Length: 62mm (2.4 in)
- Continuous Current: 40A
- Maximum Burst Current: 60A
- Cells: 16-24 Ni-MH/Ni-Cd or 5-7S Li-Po
- Speed Control: 80A Brushless
EFLM4060A Technical NotesMaximum operating temperature: 220 deg Fahrenheit. Adequate cooling is required for all motor operation at maximum current levels. Maximum burst current duration is 30 seconds. Adequate time between maximum burst intervals is required.
EFLM4060A OverviewThe Power 60 is designed to deliver clean and quiet power for 60-size sport and scale airplanes weighing 6- to 10-pounds (2.7-4.5 Kg), 46-size 3D airplanes up to 7-pounds (3.2 Kg), or models requiring up to 1200 watts of power. 
Hardware is included with the purchase of this motor. Recommended Accessories
 |
|
 |
|
|
[APCLP14100E] APC 14 x 10 Electric prop |
|
[APCLP15100E] APC 15 x 10 Electric prop |
|
[APCLP16100E] APC 16 x 10 Electric prop |
|
|
|
 |
|
 |
|
 |
Converting To Electric Flight |
| *Conversion may require some minor airframe modifications along with
installation of motor mount and motor, electronic speed control,
battery tray and battery packs. We also recommend a separate BEC or
battery pack for larger models. |
|
Expect very strong performance with a great balance of thrust and top speed. Average duration is approximately 12-18 minutes depending on throttle management. |