
Ideal for 40- to 46-size airplanes 4- to 7-pounds (1.8-3.2 Kg), 25- to 40-size 3D airplanes up to 5-pounds (2.2 Kg), or models requiring up to 800 watts of power EFLM4046A Features- Equivalent to a 40- to 46-size glow engine for 4- to 7-pound (1.8 - 3.2-Kg) airplanes
- Ideal for 25- to 40-size 3D airplanes up to 5-pounds (2.2 Kg)
- Ideal for models requiring up to 800 watts of power
- High Torque, direct drive alternative to inrunner brushless motors
Includes mount, prop adapters, and mounting hardware - Quiet, lightweight operation
- External rotor design, 6mm shaft can easily be reversed for alternative motor installations
- High quality construction with ball bearings and hardened steel shaft
- Slotted 12-pole outrunner design
EFLM4046A Specifications- Type: Brushless Outrunner
- Size: Replacement for 40- to 46-size glow engines
- Bearings or Bushings: Ball Bearings
- Wire Gauge: 14
- Recommended Prop Range: 12x8 to 14x10
- Voltage: 14.4 to 19.2
- RPM/Volt (Kv): 670
- Resistance (Ri): .04 ohms
- Idle Current (Io): 3.88A
- Shaft Diameter: 6mm (.24 in)
- Weight: 290 g (10 oz)
- Diameter: 50mm (2 in)
- Length: 55mm (2.15 in)
- Continuous Current: 40A
- Maximum Burst Current: 55A (30 sec)
- Cells: 12-16 Ni-MH/Ni-Cd or 4-5S Li-Po
- Speed Control: 60A Brushless
EFLM4046A Technical NotesMaximum operating temperature: 220 deg Fahrenheit. Adequate cooling is required for all motor operation at maximum current levels. Maximum burst current duration is 30 seconds. Adequate time between maximum burst intervals is required.
EFLM4046A OverviewThe Power 46 is designed to deliver clean and quiet power for .40 to 46-size sport and scale airplanes weighing 4- to 7-pounds (1.8-3.2 Kg), 25- to 40-size 3D airplanes up to 5-pounds (2.2 Kg), or models requiring up to 800 watts of power. 
Hardware is included with the purchase of this motor. Recommended Accessories
 |
|
 |
|
|
[APCLP12080E] APC 12 x 8 Electric prop |
|
[APCLP12100E] APC 12 x 10 Electric prop |
|
[APCLP13100E] APC 13 x 10 Electric prop |
|
[APCLP14100E] APC 14 x 10 Electric prop |
|
|
|
 |
|
 |
|
 |
Converting To Electric Flight |
| *Conversion may require some minor airframe modifications along with
installation of motor mount and motor, electronic speed control,
battery tray and battery packs. We also recommend a separate BEC or
battery pack for larger models. |
|
Examples of Airplane Setups: NOTE: All data measured at full throttle. Actual performance may vary depending on battery and flight conditions. Hangar 9 Ultra Stick 40 ARF (HAN1675 / HAN1690) Option 1: | Amps | Volts | Watts Input | Watts/Pound | RPM | | 51.5 | 14.4 | 745 | 128 | 8250 |
Expect very strong performance with very short take off rolls and a great balance of thrust and top speed. Average duration is approximately 15-20 minutes depending on throttle management. Option 2: Motor: Power 46 ESC: 60 Amp DualSky DSXC6018BA Prop: APC 13x8E Battery: Sanyo RC-3000HV 14-Cells (7-Cell packs x2 in series) Flying Weight w/Battery: 6.7 lbs
| Amps | Volts | Watts Input | Watts/Pound | RPM | | 44.0 | 13.4 | 590 | 89 | 7950 |
Expect good performance with a good balance of thrust and top speed. Average duration is approximately 5-7 minutes depending on throttle management |