EFLM4010A Power 10 Motor

EFLM4010A Key Features

• Equivalent to a 10-size glow engine for 32- to 48-ounce (910- to 1360-gram) airplanes
• Ideal for 3D airplanes 28- to 36-ounces (790- to 1020-gram)
• Ideal for models requiring up to 375 watts of power
• High torque, direct drive alternative to inrunner brushless motors
• Includes mount, prop adapters, and mounting hardware
• Quiet, lightweight operation
• External rotor design, 5mm shaft can easily be reversed for alternative motor installations
• High quality construction with ball bearings and hardened steel shaft
• Slotted 12-pole outrunner design

EFLM4010A Overview

The Power 10 is designed to deliver clean and quiet power for 10-size sport and scale airplanes weighing 32- to 48-ounces (910- to 1360-grams), 3D airplanes 28- to 36-ounces (790- to 1020-grams), or models requiring up to 375 watts of power. It’s an especially good match for the E-flite Brio 10 for high speed F3A precision or artistic aerobatics.

EFLM4010A Specifications

• Type: Brushless Outrunner Motor
• Size: 10-size
• Bearings or Bushings: Ball Bearings
• Wire Gauge: 16
• Recommended Prop Range: 10x5–12x6
• Voltage: 7.2 - 12
• RPM/Volt (Kv): 1100
• Resistance (Ri): .043 ohms
• Idle Current (Io): 2.1A @10V
• Continuous Current: 30A
• Maximum Burst Current: 38A (15 sec)
• Cells: 6–10 Ni-MH/Ni-Cd or 2–3S Li-Po
• Speed Control: 35A to 40A Brushless
• Weight: 122g (4.3 oz)
• Overall Diameter: 35mm (1.4 in)
• Shaft Diameter: 5mm (.2 in)
• Overall Length: 42mm (1.6 in)

Needed to Complete

• 35A-40A ESC
• 6-10 Cell NiMh/NiCd or 2-3S Li-Po
• 10x5 to 12x6 Electric Props

EFLM4010A Technical Notes

Maximum Operating Temperature: 220 degrees Fahrenheit

Adequate cooling is required for all motor operation at maximum current levels.

Maximum Burst Current duration is 15 seconds. Adequate time between maximum burst intervals is required for proper cooling and to avoid overheating the motor.

Maximum Burst Current rating is for 3D and limited motor run flights. Lack of proper throttle management may result in damage to the motor since excessive use of burst current may overheat the motor.

View Determining a Model's Power Requirement Article

	Converting To Electric Flight
*Conversion may require some minor airframe modifications along with installation of motor mount and motor, electronic speed control, battery tray and battery packs. We also recommend a separate BEC or battery pack for larger models.

	Download EFLM4010A 0.10 Outrunner Manual     EFLM4010A - The E-Flite Power 10 brushless outrunner motor is designed to deliver clean and quiet power for 10-size sport and scale airplanes. [ Replacement Shaft]

Recommended Accessories

	[DSXC4018BA] DualskyBrushless  ESC 40A,20V for Airplane.  40amps (55 surge), 5V/3A, 30g, 52x28x11 mm Download Programming Guide Download BEC XController Manual

	[DSBXP22003GT] 2200 mAh 11.1V (25C) High Discharge GT LiPo. Connector None Capacity 2200mAh Weight 177g Size (mm) 100x34x14 Cont Current 55A Max Current 100A (30 sec)

	Deans Ultra Plug. The industry standard in high performance connectors. Rated number one by R/C Car Action, The Ultra Plug actually has less resistance, including the solder joints, than an equivalent length piece of 12 gauge wire.   Male / Female Pair Female Four Pack

Examples of Airplane Setups:

NOTE: All data measured at full throttle. Actual performance may vary depending on battery and flight conditions.

E-flite Brio 10 ARF

Option 1:

• Motor: Power 10

• ESC: E-flite 40A Brushless (V2) (EFLA312B)

• Prop: APC 12x6E (APC12060E)

• Battery: FlightPower Evolution20 2100mAh

• Flying Weight w/Battery: 2.1 lbs

Amps	Volts	Watts Input	Watts/Pound	RPM
37.2	9.6	357	170	7800

Expect good speed and extreme vertical power for artistic aerobatics. Average duration is approximately 6-9 minutes depending on throttle management.

Option 2:

• Motor: Power 10

• ESC: E-flite 40A Brushless (V2) (EFLA312B)

• Prop: APC 11x5.5E (APC11055E)

• Battery: FlightPower Evolution20 2100mAh

• Flying Weight w/Battery: 2.1 lbs

Amps	Volts	Watts Input	Watts/Pound	RPM
33.0	9.8	323	153	8700

Expect high speeds and strong vertical performance ideal for F3A precision and artistic aerobatics. Average duration is approximately 7-10 minutes depending on throttle management.